ASP10 Digital Potentiometer
The Accu-Set Digital Potentiometer is a compact, economical control that can be used with conventional AC, DC, or Brushless DC adjustable speed drive systems to provide an LED display of set speeds and precise, digital closed loop motor speed control. An on-board microprocessor with non-volatile memory coupled with sophisticated internal software makes Dart’s Accu-Set digital potentiometer the ultimate in accuracy and control. Target speeds are displayed directly in RPM, FPM, GPM, process time, or any other engineering unit of measure. Friendly front-panel field programming permits customizing the Accu-Set digital potentiometer to the exact specifications for each application; maximum and minimum set speed, decimal points or colon, operating mode (master or follower), and the constant which takes into account motor gear ratios. The Accu-Set digital pot is simple to operate… just set the desired RPM, rate, or time in the large 1/2″ LED display by depressing the “up-down” pushbuttons, one digit at a time or fast sweep. The Accu-Set digipot settings are exact and repeatable. It will precisely control speed to a remarkable ±1/2 RPM of set speed, long term. The panel mount unit is easy to install in the industry standard cutout dimensions of 1/8 DIN. All wiring connects directly to a rugged screw type terminal strip through the easy access rear panel.
- Sync two or more motor speeds
- Programmable accel/decel rates
- Programmable P-I parameters
- Pulse feedback required - up to 50K/min
- Configurable power-up modes
- Inhibit mode
- Jog mode
- User-friendly menu driven programming from front panel
- Parameter lockout to save settings
- Programmable display units and decimal point
- Custom display bezel artwork available
- NEMA 4X Rating (with supplied gasket)
- Dual Supply 120/240VAC
- User configured output for status and diagnostics
- Non-volatile memory
- Factory default restore
- User-default restore
|MODEL NUMBER||STYLE||INPUT (VAC)||OUTPUT|
|ASP10 SMART (Closed-Loop) Drive Potentiometer||1/8 DIN PANEL MOUNT||120/240||3-wire (to any drive's speed pot circuit)|
*Shipped set for 0-2400 RPM with one pulse per revolution.
These closed loop devices require an encoder / speed pick-up. The Dart PU-E is an excellent choice!