Send us an email at TechTalk@dartcontrols.com to discuss your application.
- MD10P Control – Setup for Pizza Ovens
- ASP20 / ASP40 – P-I-D Loop Tuning
- DM8000 Meter – Bi-directional Position Display
- DM8000 Meter – Time Monitor with Alarm
- MD10P Control – 1 Oven / 2 Cook Times
- MD20 / MD30 / MD40 / MD50 – P-I-D Loop Tuning
- 125, 130, 250, 500, 65 & 700 Series – Multiple Set Speeds
- 125, 130, 150, 250, 500 – 4-20mA / 0-10Vdc Remote Signals
- 65 Series – 4-20mA Remote Signal
- Line Voltage Drives – Proper Grounding and How to Avoid the Smoke
- Drive Start/Stop Strategies – Beyond Just Pulling the Plug
- DM8000 / DP4 / 130 Series – Traversing Paint / Print / Spray Head Application
- PU Series – Adding Length To The Cable
- ASP/MD Series – Loss of Speed Sensor Feedback Shutdown
- ASP/MD Series – Motor Stall Condition With Audible Alarm
- ASP/MD Series – MD Series 2 & 3 Speed Operation
- ASP/MD Plus Series – Local Override of PLC / SCADA Remote Drive Start
- ASP/ASP Plus Series – ASP Used as Control Signal Generator
- 253G MD Plus Series – Chemical Feed / Metering Pump Application
- ASP Plus – Synchronizing Multiple Drives / Motors (Batching & Blending)
- DP4 – Preset Speeds 2 or 3 Set Speed Operation of DP4 Digital Pot
- ASP/MD Plus Series – Master/Follower Using Master Serial Interface to Control Follower
- 130/530 Series w/ Reversing Option – adding 4-20mA Follower Input
- MD / ASP Series – Take Up / Take Off Reel Control
- Conveyor-Based Applications
- MD / ASP Series – 4-20mA Master/Follower Signal
- 15 / 125 / 150 / 253 / 530 / MD40-50 – Watt Loss Calculation
