Products

EZ VFD® Universal Voltage Input AC VFD Rated to 1HP for speed control of AC motor speed controller for AC motors

EZ VFD® Variable Frequency AC Drive

Gen II Now Available - Up to 2HP!!

The EZ VFD® variable frequency drive from Dart Controls is the easiest to use VFD on the market today. Yet, it offers all the features you need to control your 3-phase AC motor, including: Soft Start, Boost, Forward-Reverse, Brake, and much more. Flexible input voltage: 115/208/230VAC, 50-70Hz. Multi-level Current Limit (MCL)™ circuit provides industry-best drive protection. Available in both open chassis and NEMA 4X enclosed, the EZ VFD® variable frequency drive eliminates the complexity of controlling the speed of your 3-phase AC motor.

Chassis and hard to find NEMA 4X versions
Optional Run Relay output
Power and Diagnostic LED's
Multi-Level Current Limit (MCL)™
Chemical and UV Resistant NEMA 4X
Flexible 115 / 208 / 230VAC Supply, Jumper Select
Potentiometer or 0-5VDC (Isolated) Signal Follower Speed Control
All Models Include Run Enable, Reverse and (Holding) Brake Inputs
Overcurrent and Over Temperature Self Protection

View Product Details >

Dart Controls 153D-200C Open Chassis DC Motor Speed Control Replaces KBIC / KBMM

Dart Controls Modbus Serial Interface Option for 153D Series DC Motor Speed Controls

153D-25E / 153D-200E NEMA 4X Enclosed SCR DC Motor Speed Control

Dart Controls 153D Series HSK Auxiliary Heat Sink Doubles HP Rating

Dart Controls 5K Ohm Speed Pot Kit SA-STOK-WO

150 Series OEM DC Motor Speed Control

New! The NEW Enclosed Digital Pot 150 Series is Available Now**

Single or Dual Voltage 120/240 VAC, 50/60Hz
Adjustable horsepower settings
Male spade terminations standard
Full wave bridge supply
1% speed regulation, ±1/2% with tach feedback
Adjustable Minimum speed
Adjustable Maximum speed
Adjustable IR Compensation
Adjustable Current Limit
Adjustable Acceleration
Adjustable Deceleration
Line voltage compensation
5K ohm speed pot, knob & dial plate included
50:1 speed range
Overload capacity: 200% for one minute
Transient voltage protection
Voltage following mode
Inhibit circuit

View Product Details >

125D 1HP DC Speed Control

The 125DV-C, 125DV-C-K and other chassis models have been replaced with the 153D Series
The 153D chassis is a 100% backward compatible, direct replacement for the 125D Series you have trusted for many years

View Product Details >

Dart Controls 125DV200EB DC Motor Speed Control NEMA 4X 90V 1HP / 180V 2HP Black

Dart Controls 125DV200EW DC Motor Speed Control NEMA 4X 90V 1HP / 180V 2HP White

125DV200E 2HP NEMA 4X Enclosed

UL Listed, all models
MOV transient protection
Adjustable linear ACCEL and DECEL adjustment
Adjustable minimum and maximum speed limits
Adjustable Current Limit and IR Compensation
Line fused
Power ON/OFF switch
Power "ON" indicator
NEMA 4X enclosure
Auto Sensing Dual Voltage 120/240VAC input
Output Voltage 0-90/180Vdc
1% speed regulation; 50:1 range
HP adjustable over 1/4 to 2HP range – no jumpers or resistors to change
Overload capacity 200% for 1 minute

View Product Details >

Dart Controls 253G-200E-29 DC Motor Speed Control Reversing

Dart Controls 253G-200C DC Speed Motor Control

Dart Controls 29 Series 4PDT No-Pass DC Motor Reversing Switch

Dart Controls 55H2 56H2 Series Isolated Signal Follower for 253G Series

Dart Controls -5 option 4-20mA Follower Option for 125D, 253G and 530B Series Controls

253G-200E NEMA 4 DC Motor Speed Control for Motors 1/8 to 2 HP

253G 2HP NEMA 4 DC Speed Control

Dual voltage - 120/240 VAC, 50/60Hz
Adjustable horsepower settings
Barrier terminal strip
Packaged bridge supply (fullwave)
1% speed regulation; ±1/2% with tach feedback
Adjustable Minimum speed
Adjustable Maximum speed
Adjustable IR Compensation
Adjustable Linear Acceleration
Adjustable Current Limit
Line voltage compensation
5K ohm speed pot, knob and dial included
Power on/off switch (enclosed models)
50:1 speed range
Overload capacity: 150% for one minute
Transient voltage protection
Inhibit circuit
Enclosed models rated NEMA 4/12

View Product Details >

Dart Controls 15DV1A DC Motor Speed Control 'L' Orientation 90/180V Motors to 2A

Dart Controls 15DV2A DC Motor Speed Control 'J' Orientation 90/180V Motors to 2A

Dart Controls 15DVP NEMA 1 DC Speed Motor Control For 90/180V Motors up to 2A DC

Dart Controls 15DVE NEMA 4 DC Motor Speed Control Up to 1/4HP 90V and 1/2HP 180V

15 Series FHP DC Speed Control

Dual voltage models of 12/24 VAC or 120/240 VAC input
Full wave bridge power supply > Adjustable Minimum speed
Adjustable Minimum speed
Adjustable Maximum speed
Adjustable IR Compensation
Fixed Acceleration
5K ohm speed pot, knob & dial included
25:1 speed range
1% speed regulation
Overload capacity of 200% for 1 minute
Transient voltage protection
AC line fuse (Enclosed)
Power on/off switch and light (Enclosed)

View Product Details >

Dart Controls 130/132LC Series DC Reversing Motor Speed Control

Dart Controls 130/132HC Series High Cycle DC Reversing Motor Speed Control

130 Reversing DC Speed Control

Adjustable horsepower settings
Barrier terminal blocks
Full wave bridge supply
Adjustable Min speed
Adjustable Max speed
Adjustable IR compensation
Adjustable current limit
Fixed accel (0.5 sec)
Line voltage compensation
5K speed pot, dial and knob included
50:1 speed range
Overload capacity: 200% for 1 min
Transient voltage protection
Onboard dynamic brake resistor
Automatic DB on power loss
1% speed regulation

View Product Details >

Dart Controls 530BRE (L) and 530BRC (R) Series DC Motor Speed Control

Dart Controls -36M/-38M Reversing Option for 530B Series DC Motor Speed Controls

533BC 3HP DC Motor Controller 3HP DC Motor

530B 3HP DC Speed Control

Dual 120/240 VAC, 50/60Hz via slide selector switch
Adjustable horsepower settings
Barrier terminal strip
Packaged bridge supply (fullwave)
1% speed regulation; ±1/2% with tach feedback
Adjustable Minimum speed
Adjustable Maximum speed
Adjustable IR Compensation
Adjustable Linear Acceleration (0.3 to 12 sec.)
Adjustable Linear Deceleration (0.6 to 12 sec.)
Adjustable Current Limit
Line voltage compensation
5K ohm speed pot, dial and knob included
50:1 speed range
Overload capacity: 200% for one minute
Transient voltage protection
Inhibit circuit
Enclosed models rated NEMA 4/12

View Product Details >

MD10P (C) / MD3P (R) / MD3E (L) Series DC Digital Drives DC Motor Drive

Dart Controls MD10P Digital DC Motor Speed Control

Dart Controls PU-E Series Indoor Duty Hall Effect Incremental Encoder Speed Sensor encoder for DC motor hall effect encoder

MD10 / MD3 Digital DC Drive

Adjustable min/max
Adjustable accel/decel
Closed-Loop digital speed regulation
Programmable power-up drive settings
Drive Inhibit mode
Jog function
Non-volatile memory preserves settings
Factory default restore function
User-default restore function
Front-panel parameter lockout
Programmable display in any rate or time units
Custom front panel artwork available
NEMA 4X rating both panel mount and stand alone enclosed models
Universal power supply - any input 85–265 VAC
Two (2) user-defined alarm contact outputs
Multiple operational modes: Rate, Time, Follower

View Product Details >

Dart Controls MD40P (C) / MD50P (L) / MD50E (R) Digital DC Speed Controls

Dart Controls OPT420 mA Follower Option for Digital DC Motor Speed Controls

MD40 / MD50 Digital DC Drive

1/50 to 2.0 adjustable HP range
Universal power supply supports 85-265 VAC in
1/8 or 1/4 DIN panel mount with NEMA 4X faceplate, NEMA 4X stand-alone enclosure
Front panel field-programming (with lock-out jumper)
Display speed in any engineering unit of measure
Two alarm relay outputs (form C, 5 Amp @ 250 VAC)
Large 1/2˝ LED display
Master/Follower modes
Displays set point or actual running speed
Adjustable PID settings
Optional your company name/ logo on the cover

View Product Details >

Dart Controls DP4 Speed Potentiometer Digital Potentiometer With Scalable Display No Encoder Required potentiometer digital

DP4 Digital Potentiometer

Field programmable Rate or Time modes
Inhibit function
Jog function
Factory default restore
User-default storage and restore
NEMA 4X Rating (with supplied gasket)
Supports bidirectional connections for regenerative drives

View Product Details >

Dart Controls ASP10 Smart (Closed-Loop) Digital Potentiometer - Master Follower Control

ASP10 Digital Potentiometer

Sync two or more motor speeds
Programmable accel/decel rates
Programmable P-I parameters
Pulse feedback required - up to 50K/min
Configurable power-up modes
Inhibit mode
Jog mode
User-friendly menu driven programming from front panel
Parameter lockout to save settings
Programmable display units and decimal point
Custom display bezel artwork available
NEMA 4X Rating (with supplied gasket)
Dual Supply 120/240VAC
User configured output for status and diagnostics
Non-volatile memory
Factory default restore
User-default restore

View Product Details >

Dart Controls ASP40 Smart (Closed-Loop) Digital Potentiometer - Master Follower Control

ASP40 Digital Potentiometer

Sync two or more motor speeds
Interfaces with any drives (AC/DC) that accepts 3-wire speed pot input
Ideal for PLC/SCADA controlled systems
Digital closed-loop P-I-D algorithm delivers accuracy of ± 1/2 pulse (feedback)
Optional open-loop operation available
Non-volatile memory maintains user configuration
Field programmable
Speed profile parameters include MIN, MAX, ACCEL, DECEL
Programming lockout feature
Universal power supply accepts any line voltage inputs from 85-250VAC @ 50-60Hz
Transient voltage protection
Compatible with many speed sensors
Two programmable alarm/status outputs
Configurable user inputs support Inhibit, Emergency-Stop, and Jog functionality
Large 4 digit, 1/2” LED display configurable in rate or time units, including decimal point
Multiple operating modes including Master and Follower
NEMA 4X when used with gasket (provided)

View Product Details >

Dart Controls DP10 Signal Generator / Signal Conditioner

DP10 Signal Conditioner / Generator

Signal converter (mA to voltage or vice-versa)
Signal attenuator (0-100% scaling of input signal, voltage or mA)
Signal generator (volts or mA)
mA loop power provided
Scalable display in engineering units
Configurable front panel lockout feature

View Product Details >

Dart Controls 730BDC / 731BDC Brushless DC Speed Control 400W for Brushless DC Motor

Dart Controls 731BDC-E NEMA 4 Brushless DC Motor Speed Control 400W

700BDC/730BDC Brushless DC Motor Control

Adjustable MIN and MAX speed; CURRENT LIMIT
Adjustable ACCEL/DECEL (703B/ 733B only)
150% overload for 30 seconds
Field selectable motor hall spacing
50:1 speed range
FWD/ REV feature
BRAKE feature (730B Series only)
Current Limit Latch feature (733BDC only)

View Product Details >

Dart Controls 731BDC (L) and 711ADC (R) Large Brushless DC Motor Speed Controls for Brushless DC Motors Brushless Motors

Dart Controls 711ADC-E NEMA 4X Enclosed BLDC Motor Speed Control 1000W

710ADC Low Voltage Brushless BLDC Motor Drive – 1000W

Adjustable MIN and MAX speed; CURRENT LIMIT
200% overload for 30 seconds
Field selectable motor hall spacing
50:1 speed range
FWD/ REV feature

View Product Details >

Dart Controls BLM701P Brushless DC Digital Speed Control With Programmable Display

BLM700 Brushless DC Drive /Tachometer

Microprocessor-based design
Digital closed-loop algorithm accuracy of ±1/2 RPM of set speed or equivalent
Non-volatile memory maintains drive settings on power loss
Factory or field programmable via front-panel keypad
Control profile settings include MIN and MAX speed, ACCEL, DECEL, display units, and more
Programming lockout feature
Transient voltage protection
Self-contained power supply for speed pickups
Large 4 digit, 1/2” LED display
Durable NEMA 4X rated aluminum housing with Polycarbonate membrane and gasket
Ambient temperature range of -10°C to 45°C
Multiple operating modes including: Master, Rate Mode – Controls in rate unit such as RPM, Gallons per Minute, etc. Master, Time Mode –Controls in time unit such as HH:MM, MM:SS, SS:TT, or other unit
60 or 120 Hall Sensor spacing - jumper selectable
Forward or Reverse rotation of motor is jumper selectable

View Product Details >

Dart Controls 65E10E / 65E20E Low Voltage PWM NEMA 4X DC Speed Control 12-48V 12 volt dc variable speed motor controller 12 volt motor speed control

Dart Controls 65E10C / 65E20C Low Voltage PWM DC Motor Speed Control 12-48V

12-48VDC supply/output, NEMA 4X enclosed PWM DC motor speed control rated 15A continuous

65E Low Voltage PWM DC Motor Control (20A)

Compact PWM motor speed control for low voltage applications
Rated for 10 or 20 amps continuous current, the 65E10/65E20 Series are compact PWM controls for 12 thru 48 volt DC (jumper selectable) battery powered applications. Features include adjustable maximum speed, minimum speed, current limit, I.R. compensation, and acceleration, plus a quiet operating frequency of 18kHz. NEW FEATURES include current limit shutdown and drive status LED’s.

Smooth, quiet 18kHz switching
NEMA 4X enclosed models
Saves battery charge for longer operation / life
High efficiency MOSFET's reduce voltage drop
Speed regulation is ±1% of base speed
Adjustable MAX and MIN speed; IR COMP; CUR LIM; ACCEL
Accepts 0-10Vdc speed signals
Inhibit input for low power start/stop switching
Current limit shutdown and output
Supply voltage and Current Limit status LED's

View Product Details >

Dart Controls 65E40 (R) / 65E60 (L) Low Voltage PWM DC Speed Control 12-36V

65E Low Voltage PWM DC Motor Control (60A)

PWM motor speed control for low voltage applications rated to 2000W
65E Series standard features include: Adjustable MIN, MAX, ACCEL, IR COMP, and CUR LIM, low battery compensation, analog armature feedback, speed potentiometer with leads, knob and dial plate. Available for 12 thru 36DVC, 40 and 60 Amp continuous motor ratings.

Saves battery charge for longer operation / life
High efficiency MOSFET's reduce voltage drop
Speed regulation is ±1% of base speed
Adjustable MAX and MIN speed; IR COMP; CUR LIM; ACCEL
Accepts 0-10Vdc speed signals
Inhibit input for low power start/stop switching
Current limit

View Product Details >

Dart Controls PU-R Series Outdoor Duty Hall Effect Incremental Encoder

PU Series Encoder

Popular encoder with 1 to 20 PPR output
NPN, Sinking Source, 5-24VDC
For indoor (PU-E Series) and outdoor / wash down applications (PU-R Series)
Drill and tap, single bolt installation
No alignment necessary

View Product Details >

Dart Controls CF Series C-Face Hall Effect Encoder 1-60 PPR

CF Series C-Face Mount Encoder

For NEMA 56 and NEMA 143TC, 145TC, 182C, 184C Frame motors
1 to 60 PPR output, 5-24VDC, NPN Sinking Source

View Product Details >

Photoelectric Optical Pickup (OPU)

Hall-effect output, 5VDC, NPN Sinking Source
For applications where C-face, drill and tap installation not possible

View Product Details >

Single Phase AC Motor Speed Controller / Speed Control for AC Motors Single Phase

AC03 Triac AC Motor Speed Control

Controls most single phase AC motors and restrictive loads, not equipped to handle capacitor start motors
Speed pot with on/off switch
Minimum output adjustment

View Product Details >

Dart Controls 55 / 57 Series 120/240VAC Variable Voltage Supply (Triac) Control

55AC Triac AC Motor Speed Control

Controls most single phase AC motors and resistive loads, not designed for capacitor start motors
For vibratory feeder, fan, pump, heating, and lighting industries. All models feature single-phase AC input and fully variable AC output
Enclosed version includes power on/off switch, power on indicator lamp and front access fuse
Triac switching to vary output phase and thus speed of (compatible)

View Product Details >