Standard Stock DC Motors
The advantages of DC speed controls with Permanent Magnet DC motors for low horsepower applications are: higher starting torque, wider usable speed and torque range, simpler dynamic braking, lower system cost, faster response, smaller size, more efficient and reliable. Standard features include: permanent magnetic field, NEMA C-face and bolt-on mounting; 1750 RPM base speed; U.L., C.S.A. mark listed; drilled and tapped for mounting Dart’s PU-Series pick-up; available from stock.
Note: Conduit box is actually mounted at 12 o’clock (top) position.
| MODEL | HP | RPM/VARM | FULL LOAD AMPS / TORQUE | FRAME | WEIGHT | REPLACES |
|---|---|---|---|---|---|---|
| LM90T025 | 1/4 | 1750 / 90VDC | 2.5 A/ 9 LB-IN | TEFC / 56C | 19 LBS | DMS1825B-56BC |
| LM90T033 | 1/3 | 1750 / 90VDC | 3.5 A/ 12 LB-IN | TEFC / 56C | 23 LBS | DMS1833B-56BC |
| LM90T050 | 1/2 | 1750 / 90VDC | 5 A/ 18 LB-IN | TEFC / 56C | 25 LBS | DMS1850B-56BC |
| LM90T075 | 3/4 | 1750 / 90VDC | 7.6 A/ 27 LB-IN | TEFC / 56C | 36 LBS | DMS1875B-56BC |
| LM90T100 | 1 | 1750 / 90VDC | 10 A/ 38 LB-IN | TEFC / 56C | 47 LBS | DMS1810B-56BC |
| LM180T050 | 1/2 | 1750 / 180VDC | 2.5 A/ 18 LB-IN | TEFC / 56C | 25 LBS | DMS18500B-56BC |
| LM180T075 | 3/4 | 1750 / 180VDC | 3.8 A/ 27 LB-IN | TEFC / 56C | 36 LBS | DMS18750B-56BC |
| LM180T100 | 1 | 1750 / 180VDC | 5 A/ 36 LB-IN | TEFC / 56C | 37 LBS | DMS18100B-56BC |
| LM180T150 | 1.5 | 1750 / 180VDC | 7.6 A/ 54 LB-IN | TEFC / 56C | 53 LBS | DMS18150L-145BC |
Note change in shaft diameter.
Downloads
LM90T025 (1/4HP 90V) DWG
LM90T025 Specs
LM90T033 (1/3HP 90V) DWG
LM90T033 Specs
LM90T050 (1/2HP 90V) DWG
LM90T050 Specs
LM90T075 (3/4HP 90V) DWG
LM90T075 Specs
LM90T100 (1 HP 90V) DWG
LM90T100 Specs
LM180T050 (1/2HP 180V) DWG
LM180T050 Specs
LM180T075 (3/4HP 180V) DWG
LM180T075 Specs
LM180T100 (1HP 180V) DWG
LM180T100 Specs
LM180T150 (1.5HP 180V) DWG
LM180T150 Specs
Certifications
CE C-UL-USRoHS Complaint
