PDF Downloads: Manual | Hookup Diagram
A compact, programmable brushless DC speed control with digital closed loop feedback and LED display for BLDC motors rated to 180 Watts. Dart’s BLM700 Brushless Micro-Drive is the ultimate value in ENERGY EFFICIENCY, accuracy and control.
The Brushless Micro-Drive is simple to operate: set the desired RPM, rate, or time in the large 1/2″ LED display by depressing the “Up” and “Down” pushbuttons on the front panel. Settings can be one digit at a time or fast sweep. The settings are exact and repeatable. It will precisely control speed to ±1/2 RPM of set speed, long term. No calibrations of the control are necessary. Industry standard cutout dimensions of 1/8 DIN provide easy panel installation. All wiring connects directly to a rugged screw type terminal strip through the rear panel. The flexibility of Dart’s BLM700 Brushless Micro-Drive design makes it uniquely suited for many commercial and industrial applications.
| MODEL NUMBER | STYLE/ CLASS ** | INPUT/OUTPUT | OPEN/CLOSED LOOP | CONTINUOUS RATING | FEATURES |
|---|---|---|---|---|---|
| BLM701P | PANEL MOUNT/ ISOLATED | 24VDC | CLOSED | 120W / 5 AMPS | > Microprocessor-based design > Digital closed-loop algorithm accuracy of ±1/2 RPM of set speed or equivalent > Non-volatile memory maintains drive settings on power loss > Factory or field programmable via front-panel keypad > Control profile settings include MIN and MAX speed, ACCEL, DECEL, display units, and more > Programming lockout feature > Transient voltage protection > Self-contained power supply for speed pickups > Large 4 digit, 1/2” LED display > Durable NEMA 4X rated aluminum housing with Polycarbonate membrane and gasket > Ambient temperature range of -10°C to 45°C > Multiple operating modes including: • Master, Rate Mode – Controls in rate unit such as RPM, Gallons per Minute, etc. • Master, Time Mode –Controls in time unit such as HH:MM, MM:SS, SS:TT, or other unit > 60 or 120 Hall Sensor spacing - jumper selectable - Forward or Reverse rotation of motor is jumper selectable |
| ** Isolation means drive will accept 0-10VDC or 4-20mA signal to change speed, without special wiring considerations | |||||
